The question of how to keep growing cannabis after harvest has been around for a while now. There are a number of different methods that can be used to keep your plants going and thriving in the long term. However, there are a few things you will need to take into account before you start the process.
Re-vegging takes time
Re-vegging cannabis is a good way to improve the yield of a plant. However, it’s not an easy task. The process requires patience and a lot of care.
You’ll need to make sure that you have the right lighting and soil conditions to succeed at re-vegging. You should also make sure to have a healthy root system. If you don’t have a well-established root system, it can be difficult to re-veg a plant.
It can take a few weeks for the re-veg process to be complete. During this time, you’ll notice that your plant is starting to put out new growth. This is because it’s transitioning from the flowering phase to the vegetative stage. Depending on your environment, it may take weeks or even months for the new growth to develop properly.
When you re-veg your plant, you need to be careful not to over water it. Watering it too much can cause the re-veg process to fail. Make sure that the pH of your water is between 5.8 and 6.8.
After you’ve completed the re-veg process, you can begin the cultivation of a new mother plant. Some growers opt to keep the mother plant for as long as possible. Others don’t like to keep the plant in their grow room and just use the clone instead.
It can be a tricky task, especially if you aren’t an experienced grower. You don’t want to overwater the plants, but you also don’t want to leave them without sufficient light.
Watering during the vegetative growth stage
When growing cannabis, you need to understand how to water it during the vegetative growth stage. This phase of the plant requires less water than when it is in its flowering stage. However, it will need more when it is ready for harvest.
A good way to water cannabis during the vegetative growth stage is to use a spray nozzle. Water should begin near the stem of the plant and move toward the edges of the pot. The goal is to get water to all parts of the plant without overwatering.
To ensure proper plant growth, you will need to provide ample light and nutrients. You will also need to monitor the temperature and relative humidity of the air.
The vegetative stage of the cannabis plant is one of the most important stages of the plant’s life cycle. In this stage, your plant is forming new root systems, absorbing nutrients and trying to get the water it needs.
During the vegetative stage, you need to make sure you give your marijuana plant plenty of light. Ideally, the vegetative stage will last for four or six weeks.
When the vegetative phase ends, you should transfer the plant to the flowering stage. This will allow it to grow faster. Once the plant is flowering, it will need more light, carbon dioxide, and nutrients.
If you have a plant that isn’t performing well, you might want to reconsider your nutrient schedule. Nitrogen is particularly important during the vegetative phase. It is used to form chlorophyll, which is essential for photosynthesis.
Proper air circulation reduces mold and mildew
If you want to keep your cannabis flowers in good health, it is important to keep them properly ventilated. Mold and mildew can attack your plants and affect their growth. This can result in significant losses, so it is vital to take preventive measures.
It is possible to control the onset of mold and mildew in your cannabis grow room. There are several methods, such as using a dehumidifier and a humidity monitor.
It is important to get rid of infected buds as soon as you detect them. The fungus that forms on infected buds can spread to newer leaves. Use a damp paper towel to wipe off the affected areas.
Aspergillus and Fusarium species can both damage your cannabis crop, but are difficult to detect. They can be particularly problematic if you are immunocompromised. These fungi can lay dormant for years before becoming active.
Mould loves moisture, and you may want to use a dehumidifier to pull excess moisture from the air. Fans are another way to improve the ventilation in your grow room.
You should also be careful not to overcrowd your dry rooms. This can increase the humidity levels, which can then be ideal conditions for mold and mildew.
Powdery mildew is a type of fungal infection that is common in greenhouses and high-humidity environments. You can reduce the risk of powdery mildew by keeping humidity levels below 40 percent.
Sensimilla is a female cannabis plant with high levels of THC
Sensimilla is a female cannabis plant that produces large, seedless buds. This type of cannabis is much more potent than regular cannabis and has a smoother smoking experience. It is one of the most popular cannabis varieties today.
The name sensimilla is derived from the Spanish word for’seedless’. However, a more accurate definition of the term is’seedless weed’.
Seedless weed has become the norm in recent years, as more growers prefer to cultivate this strain than the traditional cannabis plant. This type of plant is much easier to grow than the traditional cannabis plants.
Seedless weed is also much more aromatic than seeded buds. These buds contain more aromatic compounds and are a lot more potent.
The best sensimilla marijuana has been harvested with care. It has an abundant layer of resin that contains THC and other active ingredients.
Sinsemilla cannabis is grown in a number of regions across the U.S. and throughout the world. In the United States, the average THC level is 12%.
Sinsemilla was popularized in the 1970s as a new cannabis variety. Before the 1970s, the term’sinsemilla’ was used to describe the production of a high-THC marijuana.
In the 1970s, growers began using the term to describe marijuana without seeds. They believed that the unfertilized female flower would retain its resin content. Hence, they prevented pollination of the female plant.
As a result, the THC content of sinsemilla reached double the level of fertilized weed. This increased the popularity of the plant. Today, you can find sensimilla marijuana in a number of dispensaries.
Heavy rainfall can create perfect conditions for spore germination and propagation
The good old fashioned way to protect your crop from fungal disease is to install a spore trap in your field. These little buggers do the job well, and are a snap to set up. If you aren’t the do it yourself type, there are companies out there who will do the dirty work for you. This is particularly true if you are located in an area where it’s common to have a bout with plant-transmitted fungi. To ensure that you don’t end up with a sorry case, take the time to educate yourself on the most important details before making the plunge.
You’ll want to make sure you get your hands on the right type of spore trap. A good rule of thumb is to use one that is at least two inches in diameter. If you’re lucky enough to have some extra room in your shed, you might consider making the jump and using a larger one. Keeping the spores out of the air is key to preventing a nasty bout with fungal disease in the first place. Having said that, don’t be shy about sending your samples out to the lab at a high enough frequency to actually see a return. Having a few to choose from is a lot better than trying to sift through a large number of stale ones.
Avoiding crop damage during periods of heavy rainfall
One of the best practices for indoor cannabis growers is to keep the plants hydrated. However, excess rainfall can wreak havoc on the crops, particularly in damp climates. Luckily, there are a number of tips and tricks to avoid a crop-destroying rainy day. The aforementioned trifecta includes using the right fertilizers, spacing the plants correctly, and avoiding overwatering.
In short, a waterlogged soil can lead to a shallow-rooted, low-vigorous crop. To prevent this fate, the following tips should be applied at the outset.
The aforementioned trifecta should be accompanied by an additional set of fans – not one, but several. Adding more airflow to the mix will reduce humidity levels and aerate the soil. A good ventilation system will also mitigate mold and mildew.
In addition to these measures, the following steps should be implemented to avoid crop damage: trellis the plants appropriately, stake them properly, and make use of the topsoil layer. When the crop is dry, remove all but the most robust leaves and colas. Finally, a proper pruning procedure should be employed in order to minimize stress on the plants.
Of course, you don’t want to prune the wrong plant, so ensure that you’re using the right tool for the job. Another trick is to use a combination of high quality compost and compost tea in your soils and mulches. These are great for introducing beneficial microorganisms that will boost yields.
