Depending on the type of plant training you’re using, you can see a different effect on the plant’s growth. You may find that one type is more effective than the other, but all types have some advantages. For instance, when used in conjunction with a good breeding program, Supercropping can boost bud size and yield, and manifolding and low stress training can increase the amount of cannabis produced per square foot of land.
Low stress training
There are numerous ways to increase your cannabis yield, and low stress training is one of the best. This process will increase your cannabis plant’s total yield by a considerable amount. Depending on your grow conditions, your marijuana plants’ yield may go up by 50% or more.
The most obvious low stress training technique involves bending your cannabis stems in a certain direction. You can also use a variety of other methods to achieve the same result.
In order to do this, you will need a pair of scissors, a pair of garden ties, and some soft coated garden wire. You can attach these items to your pots with the help of safety pins. These items will ensure that your plant will not snap off.
Trying to shape your flowering plant can be a dangerous undertaking. However, it is important to keep in mind that the right techniques can yield impressive results.
Low Stress Training (LST) is a method that will allow your cannabis plant to produce bigger and more uniform buds. It is also a good way to ensure that all parts of the plant receive adequate light.
Although there are several ways to implement LST, the tie-down technique is the most popular. You can tie your cannabis plant to the ground with a heavy-duty tie or stake it directly into the soil.
Another less invasive approach is to massage the branches. By massaging the young branch, you will create micro fractures that will strengthen the newly developed branch.
Finally, you can use a pair of plant scissors to cut off fan leaves. Use the right scissors for the job and your cannabis plant will have a well-exposed canopy.
A final tip is to test your branches for flexibility. If they are not flexible enough to bend in the desired direction, you will need to remove the ties or reattach them. Once you have done this, you can begin to shape your plant.
While Low Stress Training can have some pretty impressive effects on your cannabis plant, it is important to remember that it can cause damage to your plant. It is recommended that you stop the procedure after a month.
Manifolding
Different types of plant training can affect the way cannabis plants grow. These techniques can increase yields, reduce stress on the plant and encourage more bud development. Depending on the strain and grow conditions, it’s possible to get up to 50% increase in yields.
There are three main types of plant training methods. Topping, manifolding and LST. Each technique has its own benefits and disadvantages, but all of them have one thing in common. By redistributing the energy that the plant has accumulated to a few sites, growers can achieve more yields.
Topping is the most basic form of plant training. This involves cutting back the growing tip of the plant to expose more light. The resulting colas are impressive. If done correctly, the plant will eventually produce multiple colas. It’s easy and doesn’t require much work.
Manifolding is another logical plant training method. Like topping, it doesn’t require much work. However, it does require the plant to be healthy. You can use a hand drill or a pair of scissors to bend the branches. Small weights are also very useful, particularly for outdoor cultivation. They can be used to help strengthen the branches and prepare them for buds.
Low Stress Training (LST) is an effective training method that is often used to enhance the harvest of cannabis plants. It’s simple, low-risk, and can be applied to all types of plants. Some growers even implement it during the flowering phase.
Topping weed is a simple but effective way to sculpt the plant and boost yields. In addition to encouraging more bud development, the process can also minimize apical dominance. Apical dominance is a natural biological mechanism that ensures that the plant grows toward its primary source of photosynthetic energy.
For best results, LST should be started during the vegetative stage. This method will encourage the plant to flatten at the canopy, promoting a uniform canopy and more even distribution of growth hormones and sugars. A flat canopy will also encourage more bud formation.
Whether you choose to do LST, or some other type of training, you’ll need a few essential tools. These include garden ties, soft coated garden wire, twist ties, garden tape, a hand drill and a pair of scissors.
Supercropping
If you’re interested in growing cannabis, it’s important to learn about the effects of different plant training methods. Having a good grasp of how different techniques work will help you get the most out of your crops.
Low stress training is a simple, straightforward method of shaping cannabis plants to achieve maximum yields. It can be done on both indoor and outdoor plants. It involves the bending of strategic branches to increase bud production and yield.
To start low stress training, you will need a pair of scissors and some soft-feel garden cord to tie the cannabis plant. The rubber-coated wire will not cut through the cannabis plant when it tries to force itself back into an upright growth structure.
For a more complex, yield-boosting training technique, you can opt for the Screen of Green technique. This is similar to low stress training, but requires a bit more effort. Instead of tying the cannabis plant, you can use a trellis to separate its branches. You can also defoliate the plant to increase light penetration.
Topping a plant is another simple and effective way to boost its yield. A single, dominant bud tends to monopolize nutrients and hormones. Cutting off its main growing tip redistributes the growth hormones to smaller buds on the side branches. As the buds grow, they make the entire plant bushier.
Another simple training method is cloning. Cloning promotes formation of a whole variety of buds all over the plant, and reduces the risk of mould and bud-rot. Especially useful in high humidity situations, cloning enables you to harvest whole plants.
Finally, there’s the low-tech method of supercropping. Super-cropped plants have stronger vigor and higher yields. However, it can be difficult to standardize and it can cause damage to the plant.
In addition to these training methods, horticulturists have come up with some other ways to enhance the yield of their plants. One of the most popular methods is the tubular trellis. These trellises can be used vertically or horizontally. They provide support and save space for the growing cannabis plant.
Apical dominance
Apical dominance is a plant’s natural tendency to grow vertically. This is because the shoot apex absorbs more light for photosynthesis. However, it also inhibits lateral bud outgrowth. As a result, the plant will allocate its energy budget to the main cola and the side shoots.
There are two types of growth hormones that are responsible for apical dominance. They are cytokinins (CK) and auxins. These two interact with one another to control the height of the cannabis plant. Auxins inhibit elongation and regulate meristem activity, while CKs promote outgrowth.
Whether a plant is cultivated outdoors or indoors, it is important to keep its structure in place. This affects its quality and yield. Besides, it allows consistent access to light. Therefore, shaping the plant to achieve an even canopy is a beneficial practice.
A study was conducted to explore the effects of exogenously applied plant growth regulators on the morphological characteristics of three different Cannabis genotypes. Plants were treated with a mixture of NAA/BAP solution (1:5) every fortnight. In addition, the number of internodes and cannabinoid content were measured.
The experiment was performed at the University of Hohenheim, Germany. It started on November 28, 2018. After a week, the plants were removed and subjected to a series of measurements. The length of axillary branching, apical dominance, cannabinoid content and biomass yield were determined.
For apical dominance to be broken, the main stem of the plant should be bent toward the rim of a container. The main stem should then be tied in place with soft plant wire. While it is not recommended to use this method for auto-flowering strains, it is a useful technique to increase yields in any type of cannabis strain.
Other techniques that are used to increase yield are Low-Stress Training and topping. Both of these methods can be applied to established plants. LST is a good way to achieve a bushier plant with multiple, well-developed flowers. Alternatively, topping is a higher stress technique that can produce larger yields.
Exogenously applied growth regulators can also be applied to a plant to influence its height. They can increase the biomass and seed production.
