The Impact of Different Types of Trellising on Cannabis Yields

The impact of different types of trellising on cannabis yields

When it comes to growing cannabis, there are many factors that come into play, such as the type of trellising you use. The different trellising styles and methods affect the amount of yield you can expect from your crop. There are four major types of trellising methods to consider: Lolllipopping, SCROG, SOG, and vertical. Each has their own benefits, and the best way to determine which is the best choice for your crop is to research each method and figure out how they compare.

Vertical vs horizontal

If you want to grow marijuana in an outdoor garden, you need to decide whether to use vertical or horizontal trellising. Generally, it is advisable to use a vertical trellis to maximize your yields. This is because it provides support for tall plants and provides airflow for the canopy. It also allows for better spacing between the cannabis plants.

You can trellis your plant to get the maximum light exposure, which is important for growing marijuana. But it is crucial to make sure that you use the right techniques to reap the benefits of trellising.

A trellis system will support your plants and help them develop to their fullest potential. It will also provide structure to the canopy. The materials for trellising can include plastic, metal, wood and even netting.

One of the most important things to remember about trellising is to keep it clean. You need to ensure that the materials you are using are pest-free. Otherwise, it can cause damage to your plants. To prevent any mold or pest infestation, you must follow strict hygiene standards.

Vertical trellising is typically used in cylinder-shaped custom grow-ops for commercial growers. There are hundreds of plants that can be housed in such a grow-op. However, you can also opt for vertical trellising to increase your indoor cannabis yields.

Another benefit of trellising is that it provides an even canopy. This helps you to ensure that all the bud sites receive the same amount of light. Without a trellis, the light might be slanted, causing underdevelopment in the plant.

If you are thinking about trellising your plant, you should consider using a grid pattern. By using a grid pattern, you will be able to get equal light exposure to all the branches. In order to do this, you will need to create a 6″x6″ grid of holes. Once this is done, you can weave the branches through it.

See also  What States Allow You to Grow Your Own Cannabis?

As a result, you can produce large, uniform buds. If you wish to achieve the best results, you should try various strains of cannabis.

LST vs Lolllipopping

If you are interested in maximizing your cannabis yields, you need to understand the difference between LST and Lolllipopping. These two techniques are useful in directing your plant’s growth.

LST is a technique used to maximize your grow lamp’s efficiency. It involves pulling the lower branches of your plant away from the main stem. This will result in more light reaching the flowers and fruit.

Lollipopping is a similar process. The difference is that the main stem remains vertical. However, your lower branches will now catch up to the higher ones. This will result in a bushier and more evenly sized canopy.

As the name implies, the most obvious use for this trellis trick is to lollipop your plants. Doing this will increase the number of buds you get per plant. Also, a lot of the energy that was previously spent on the lower part of your plant will now go toward the top.

In addition to lollipopping, you can also try other training methods. For example, thinning your leaves can improve airflow around the plant, which can decrease the risk of mould and other issues. While this is a good technique to have in your arsenal, it’s best not to do it too often.

Other techniques include topping and low stress training. While these may not be the most exciting ways to boost your plant’s output, they can pay off in the long run. Topping is a simple procedure that requires cutting the tips of the plant with a pair of scissors.

Low Stress Training is another popular method of improving yields. The main purpose is to allow airflow between the buds, which increases the amount of light that is distributed throughout the plant. Aside from that, you can reduce the number of lights you need.

Lastly, there is the ScrOG method, which is the most effective way to cultivate cannabis. While it can take some time and patience, it’s worth it. Not only is it easy on the plants, but it also provides an even canopy and a wealth of large and evenly sized flowers.

See also  The Importance of Proper Drainage in Cannabis Cultivation


There are many different methods for cultivating cannabis. The two main techniques used are SOG and SCROG. Both can boost cannabis yields. But each method is best suited to specific types of strains.

SOG is a hydroponic cultivation procedure that uses many plants per square meter of growing space. The amount of plant material is also high, which means more opportunity for pests and diseases to get a hold of your crops. Consequently, it’s a more time-consuming and labor-intensive method. You’ll need to regularly change your growing environment to keep your crop healthy.

If you’re looking to maximize the quality of your harvest, SOG is the better choice. However, SOG is more complicated to maintain than SCROG. It’s also a more expensive technique. In addition, it can lead to legal issues. This is especially true if you grow cannabis for medicinal purposes.

SCROG, on the other hand, uses a screen to create a flat canopy. In this case, the screen is attached to a horizontal wire trellis. Branches are then weaved through the holes of the screen.

These two techniques are ideal for cannabis growers with a limited number of plants. They both work well for indica-dominant hybrids. Aside from that, they are perfect for growers in cramped areas.

The downside to SOG is that it requires the same intensity of light for all of your plants. That means you’ll have to prepare ahead of time. On top of that, your plants will need to be kept healthy, which means you’ll need to regularly check them for signs of disease. Additionally, your plants will need to be trimmed if they’ve grown too tall.

SCROG is a great option for novices. The trellis and plant canopy are easier to manage and lessen the amount of care you’ll need to give. Many experienced SCROG growers use a metal screen instead of a bamboo one. Nevertheless, this can still be a tricky process.

If you’re interested in reaping the benefits of the SOG and SCROG methods, you need to be sure you’re properly trained. Using the wrong training technique can result in your crops turning out mediocre.

See also  What Happens If You Give a Cannabis Plant 24 Hours of Light?


There are many training techniques used to grow cannabis plants. Some growers prefer to use vertical trellising and others horizontal trellising. In either case, trellising has the power to improve the yield of your crop. It helps in spacing out the branches of your plant and directs them towards growth.

Vertical trellising is useful for outdoor cultivation, and is usually created with tall mesh frames. This type of trellis creates an illusion of lush foliage. The frame stands up to the elements, and provides support for the massive plants.

Horizontal trellising is favored by indoor growers, and requires a bit of strategy and science. The goal is to create an even canopy and to evenly distribute light throughout the flowering sites.

Trellising is a technique that can help your cannabis grow bigger and stronger. It can also protect it from bud rot. When trellising a plant, you need to ensure that the trellis will not damage it in wind. You also need to make sure that the trellis will not encroach on the roots of the plant.

One way to make the most of trellising is to use cloning. Cloning encourages formation of buds throughout the plant. It is especially helpful in high humidity situations. Also, cloning reduces the risk of mold.

Another training technique is lollipopping. Once the plants begin to produce buds, you can lollipop the top of the plant to concentrate the energy on the flower. By doing this, you will increase your yield and eliminate lower parts of the plant.

While cloning and lollipopping are great ways to boost your yield, there are other ways to train your plant. Low stress training (LST) is a technique that allows you to manipulate your plant without harming it. To do this, you need to remove 70 to 75 percent of its tip, using scissors or a mutilating tool.

Another training method is Screen of Green (ScrOG). ScrOG is the standard horizontal trellis used by indoor growers. Using this method involves learning the proper pruning techniques.

Please follow and like us:
Pin Share
Follow by Email